Armitron WR330 Instructions

The Armitron brand earned its tagline America's Watch with low prices and massive availability. As of this publication, Armitron watches are available at more than 10,000 locations throughout the U.S. and are the number one selling watch line in several retail outlets. Although no longer manufactured, the Armitron WR 330 went a long way in helping Armitron build its current reputation. Most considered the watch reasonably priced and it was widely available. Working with the many features a watch takes little time to set up and is relatively easy.

Instructions

Mode Selection

1. Press the "Mode" button, located at the lower left corner of the watch once to go from time-telling mode to chronograph mode. Press the "Mode" button four times to return to time-telling mode.

2. Press the "Mode" button twice to go from time-telling mode to alarm mode. Press the "Mode" button three more times to return to time-telling mode.

3. Press the "Mode" button three times to go to the timer mode. Press the "Mode" button twice to return to the time-telling mode.

4. Press the "Mode" button four times to go to the second time zone feature. Press the "Mode" button one more time to return to time-telling mode.

5. Press and hold the "Adjustment" button, located in the upper right-hand corner of the watch to go to the calendar mode area. Release the "Adjustment" button to return to the time-telling mode.

Setting the Time

1. Press and hold the "Set" button, located on the upper left-hand corner of the watch. When the seconds flash, press the "Adjustment" button to zero out the seconds. Release the "Set" button.

2. Press and hold the "Mode" button until the hours flash. Press the "Adjustment" button to advance the hours. The button can be pressed and released to advance the hours one hour at a time, or pressed and held to advance the hours rapidly. Release the "Mode" button.

3. Press and hold the "Mode" button until the minutes flash. Press the "Adjustment" button to advance the minutes. Press the button rapidly to advance the minutes one minute at a time, or press and hold the button to advance the minutes rapidly. Release the "Mode" button.

4. Press and hold the "Mode" button until the months flash. Press the "Adjustment" button to advance the months until reaching the desired month. Release the "Mode" button and press it again until the date flashes. Press the "Adjustment" button to advance the date until reaching the desired date. Press the "Mode" button again until the days of the week flashes. Press the "Adjustment" button to advance the days of the week, until reaching the desired day of the week. Press the "Mode" button one final time until the watch flashes "12 or 24 hours." Press the "Adjustment" button to select between 12-hour mode and 24-hour mode. Press the "Set" button to return to time-telling mode.

Using Chronograph Mode

1. Press the "Mode" button one time from time-telling mode to enter the chronograph mode.

2. Press the "Adjustment" button one time to begin timing.

3. Press the "Adjustment" button to stop timing.

4. Press the "Set" button to return to zero.

5. Press the "Mode" button once to return to time-telling mode.

Using the Lap Counter

1. Press the "Mode" button one time from the time-telling mode to enter the chronograph mode, and press the "Adjustment" button to begin timing.

2. Press the "Set" button to start the lap counter.

3. Press the "Adjustment" button to stop timing, and press the "Set" button to reveal the final lap time.

4. Press the "Set" button again to reset to zero.

5. Press the "Mode" button to return to time-telling mode.

Setting the 24-Hour Alarms

1. Press the "Mode" button two times while in the time-telling mode to enter the alarm mode.

2. Press and hold the "Set" button until the alarm hours flash. Press the "Adjustment" button to advance the alarm hours. Press the "mode" button until the alarm minutes flash. Press the "Adjustment" button to advance the alarm minutes.

3. Press and hold the "Mode" button again until the alarm number flashes. Press the "Adjustment" button to choose between alarm number one and alarm number two.

4. Press the "Set" button to end the sequence and press the "Mode" button to return to time-telling mode.

Activating the Alarm and Hourly Chime

1. Press the "Mode" button two times while in the time-telling mode to enter the alarm mode.

2. Press the "Adjustment" button to activate the alarm.

3. Press the "Adjustment" button again to activate the hourly chime.

4. Press the "Adjustment" button again to deactivate the alarm, if desired. Press the "Adjustment" button one more time to deactivate the hourly chime, if desired.

5. Press the "Mode" button to return to time-telling mode.

References

• Programming Web Site DataBases: Armitron WR330 Watch Manual