How to Replace an ERC on a GE Profile Oven

GE profile ovens have an electronic range control (ERC) installed on its control panel. When the oven is not in use, the ERC displays the time of day. When the oven is in use, the ERC displays pertinent information about the oven's current state, including the cooking mode and oven temperature. Further, the ERC also contains the kitchen timer. If the ERC malfunctions, the oven will not function properly.

Things You'll Need

• Screwdriver

Instructions

1. Pull the range away from the wall and unplug the power cord.

2. Remove the upper-back panel of the range behind the control panel.

3. Remove the screws securing the ERC to the interior of the control housing.

4. Remove the overlay from the old ERC and affix it to the new ERC.

5. Secure the new ERC to the interior of the control housing, using the mounting screws that were removed from the old ERC.

6. Transfer the wires from the old ERC to the new ERC, one at a time.

7. Replace the upper-back panel, securing it with the screws that were removed.

8. Plug the range back into the wall, then push the range back against the wall.

References

• Repair Clinic: Range Clock Control Replacement