How do I Explain the Camera Multi-Beam Autofocus System?
Multi-beam autofocus is a camera apparatus that takes measurements to estimate the distance between the subject and the lens using infrared or visible light. It then uses a basic formula to correctly adjust the focus so that the area where the measurements are taken is in-focus for the lens length. The technology is advanced, but the basics behind it are easily broken down into a few parts. It has become an internal part of digital photography, and in fact is important to many of the basic functions of a Digital Single Lens Reflex camera.
Other People Are Reading
Instructions
-
-
1
Explain the idea of contrast, which is the difference between the the dark and light areas of a photo.
-
2
Illustrate that most photos are most in focus at the areas where there is the greatest amount of contrast. You may need to explain how to read a histogram to back up this point.
-
-
3
Demonstrate how the camera will autofocus at the points on the histogram where there is the most contrast. This can be done by starting with a low-contrast element and then adding a higher contrast element. When you remove and add the higher contrast element, the camera will again autofocus on the lower contrast element.
-
4
Introduce the idea that in a digital camera's autofocus, greatest contrast will correspond to greatest sharpness. This was illustrated in the step above by adding and removing the element.
-
5
Describe the process by which the camera measures the edges of these objects in the frame by illuminating them with bright flashes of light in either the visible or infrared spectrum. Though you do not see these in the photos, they are present immediately before while focusing.
-
6
Explain that the multi-beam technique uses more than one beam every time it takes measurements. This ensures that it gets a more accurate reading. It's like that old adage: measure twice, cut once.
-
1
References
- Photo Credit Jupiterimages/Photos.com/Getty Images
