How to Dehumidify a Bathroom
On average, a typical one-family home in America uses approximately 13 gallons of water per day showering, according to the University of Kentucky. This hot water turns into humidity in the bathroom, which will not only fog up your mirrors but can also lead to mold growth. Mold grows on walls, towels, shower walls and shower curtains. Removing the humidity from the bathroom after a shower and throughout the day prevents the formation of mold growth. Does this Spark an idea?
Instructions
-
-
1
Install a dehumidifier inside the bathroom. The dehumidifier will remove the moisture from the air, depositing it into a tray that is emptied out. Choose a dehumidifier large enough to accommodate your bathroom. The dehumidifier is either run during and directly after a shower or all day long, if you have a moisture problem inside the bathroom.
-
2
Allow the bathroom door to remain open when showering. This will ensure that the humidity does not build up inside the bathroom while you bathe, which will cut down on bacterial growth.
-
-
3
Install an exhaust fan in the bathroom. These are placed on the wall or ceiling and when turned on, pull the humid air out of the room. The exhaust fan is run during and directly after bathing to evacuate the humid air.
-
4
Inspect the pipes in the bathroom, such as the ones found under the sink. Repair any leaks in these pipes, as the excess water dripping out will lead to excess moisture and humidity in the room.
-
5
Set a small plastic container filled with kitty litter in the corner of the room. The litter will help absorb some of the room's humidity.
-
6
Open the window while you are showering or anytime the weather outside is pleasant. The window will allow fresh air into the room while allowing some of the humid air to escape.
-
1
References
- Photo Credit BananaStock/BananaStock/Getty Images
