How to Climb a Tree to Cut it Down

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Tripod ladder

  • Chain saw

  • Fall arrest harness

  • Rope

A fall arrest harness will help keep you from falling out of a tree.

While cutting down trees is often a straightforward task, the process can be made more complicated, if the tree has obstacles in its drop zone. For example, a tree that grows in a fenced-in residential area may have neighboring homes, fences and yards in its fall zone. When simply dropping a tree is not an option, the next choice is to remove the tree in sections. Arborists frequently cut down a tree, by climbing it and removing it piece by piece.

Advertisement

Step 1

Tie a tripod ladder to the trunk of a tree. Tying a ladder to the tree will help stabilize it. A tripod ladder is more secure than a leaning hardware ladder, and is designed for use in orchards or for working around trees.

Video of the Day

Step 2

Start your chain saw motor and place the saw on the ground.

Advertisement

Step 3

Tie a rope to the chain saw handle.

Step 4

Buckle a fall-arrest harness around yourself. Slip the securing line around the trunk of the tree and fasten it to the fall-arrest harness.

Step 5

Climb the tree using the tripod ladder. Slip the fall arrest harness up the trunk, as you climb the tree. Carry the rope from the chain saw, as you climb the tree.

Advertisement

Step 6

Tie a rope to each section of tree that you want to cut down.

Step 7

Lift the chain saw up to you, by pulling it up with the rope. Use the chain saw to cut limbs and sections of the tree that are lower than chest high. Cut through a trunk or limb section at a 90-degree angle, one-third of the way through the tree, so that a triangular-looking chunk has been removed from that side. On the opposite side, cut into the tree, straight across, two-thirds of the way through, so that the blade hits the area where the angled cut was placed, suggests Oregon State University. The limb will fall in the direction of the 90-degree angled cut.

Step 8

Lower the cut section of tree to the ground, slowly.

Tip

Other methods for climbing a tree to in order to cut it down include using climbing spikes, a cherry picker or a crane with a bucket attachment. Always be certain that you are well-trained on any climbing equipment, before attempting to use it.

Always wear safety equipment: gloves, sturdy boots, long pants, long sleeves, a hard hat and safety goggles.

Warning

Attempting to fell a tree that you have climbed is a dangerous process. If you are unfamiliar with the equipment you are using or unsure of your climbing ability, hire an arborist to remove the tree. Do not attempt to remove a tree that is near power lines. Doing so is not only dangerous, it can be deadly.

Advertisement

Video of the Day

references & resources

Report an Issue

screenshot of the current page

Screenshot loading...