How to Draw a Tech Deck
A Tech Deck is a small-scale model of a skateboard collected by skateboard enthusiasts. If you want to create your own Tech Deck design, it is best to draw up a mock on paper to create a visual representation of your design. You can create a Tech Deck on paper the same way you would draw a standard skateboard.
Other People Are Reading
Instructions
-
-
1
Draw two half circles about 4 inches apart to form the opposite ends of the Tech Deck. Connect the half circles with two lines to form the body of the Tech Deck. The drawing is from the perspective of the bottom of the Tech Deck.
-
2
Draw a small rectangle, about 1/2 cm by 2 cm, on one point where the curve meets the body. Draw the rectangle inside the Tech Deck and close to the edge. Slightly bevel all four edges of the rectangle. This will be the first wheel of the Tech Deck. Repeat this step four times at all points where the curves meet the body of the Tech Deck.
-
-
3
Draw two small squares in the middle of the two wheels on either side. Draw two intersecting, parallel lines through both squares to connect the wheels on both sides. Erase the sides of the squares that are intersected by the lines. You have now finished the structure of the Tech Deck.
-
4
Draw a design or logo on the main body of the Tech Deck. You can choose your favorite Tech Deck logo to copy or create your own design.
-
1
Tips & Warnings
Create a few different designs before you settle on one for your finished model.
References
Resources
- Photo Credit Hemera Technologies/PhotoObjects.net/Getty Images
