Nerf Vulcan EBF-25 Instructions

Found This Helpful

Nerf products, which are made by Hasbro, have come a long way over the years. One of Nerf's earliest products was the nerf football. During the 1970s and 1980s, Nerf expanded its sports collection to include the Nerf basketball and baseball. Nowadays, Nerf's latest evolution includes a wide array of Nerf long-strike blasters, which fire foam darts from clips that attach to the toy guns. The Nerf EBF-25 N-Strike is equipped with a folding tripod and an ammo-feed box that holds up to 25 darts.

Things You'll Need

  • Phillips screwdriver
  • 6 D batteries

Instructions

  1. Slip the carry handle into place on each side of the upper-middle section of the body of the blaster through the two holes and then slip the barrel tip through the barrel end of the blaster with the T-shape pointing up.

  2. Locate the battery door and remove the screws holding it in place with the Phillips screwdriver. Insert the 6 D batteries. Match the positive-negative direction lines inside the battery compartment to the directional markers on the batteries themselves.

  3. Slip the bolt-release bar through the mid-body of the Vulcan and then snap the other plastic bolt onto the end of it.

  4. Snap the ammo box onto the latch on the left-hand side of the Vulcan EBF-25 with the breech cover in the up position. Open the breech cover once you have snapped it on.

  5. Slip the Nerf darts into the bandolier and then connect the dummy cartridge on the bandolier into the feeding gear's notch. Place the bandolier inside the breech cover and then shut it.

  6. Set the power switch to the "Off" position and pull the cocking rod back and fire to fire single shot. For full automatic fire, slip the power switch to the "On" position and fire.

Related Searches

References

Comments

You May Also Like

Featured

Related Ads

Related Searches
Watch Video

#eHowHacks: Open a Wine Bottle With a Shoe