How to Use Snap Fastener Pliers
Snap fasteners are an alternative to zippers and buttons when making your own clothing. Snaps are also decorative additions that come in a variety of styles and colors. There are many ways to attach snaps to clothing, from anvils and strike hammers to pliers. Using snap fastener pliers might take some practice, but they are often quicker than the old anvil-and-hammer method. Snap fastener pliers are available at fabric stores and craft shops.
Instructions
-
-
1
Position the prong closure ring on the bottom side of the hole in the fabric, if using prong ring sockets for snaps. If you are using the post type, insert the closure socket stem through the fabric.
-
2
Place the socket over the closure part of the snap on the opposite side of the fabric.
-
-
3
Slide the jaws of the snap fastener pliers over each side of the snap assembly. The flat portion of the pliers should be under the closure portion of the snap.
-
4
Squeeze the pliers together with your hands until you hear and feel the snap assembly secure to each other. Some pliers require holding the bottom jaw against a flat surface and striking the top jaw with a rubber mallet.
-
5
Repeat the process for the remaining snaps.
-
1
