How to Darken Home Interior Windows
Using window tinting or window blackening film on home interior windows can save energy by blocking sunlight, increase privacy and make it easier to sleep during daylight hours or in well-lit areas. Tinting film can be purchased online and at many local home and auto parts stores. Some come in pre-cut sizes for the average home windows; others simply come in rolls that need to be cut to fit. Some window tinting film is available with a permanent adherent or an easy-too-remove static cling. Be sure to look at all your options and choose the one best suited to your needs before purchasing.
Other People Are Reading
Things You'll Need
- Window tinting or blackening film
- Squeegee
- Soap and water
- Utility blade or razor blades
- Measuring tape
Instructions
-
-
1
Measure your windows. You'll need an accurate measurement of your window size before cutting the film to fit. If your window is divided into panes, measure each pane individually for the cleanest fit.
-
2
Clean your windows using a mixture of soap and water. Window cleaning products with ammonia or vinegar can stop the film from adhering to the glass or cause unsightly bubbles. Be sure to remove any dirt and debris from the windows, rinse the soap thoroughly and leave the window wet with clear water.
-
-
3
Cut the film to fit your pane of glass. Leave a little extra film around the edges that can be cut off with the razor blades once the film has adhered to the window.
-
4
Begin adhering the film to the window at the top of the pane. Starting in a top corner, press the film against the glass and work your way down until the entire pane is covered.
-
5
Starting in the center of the pane, begin smoothing out the bubbles with the squeegee. Check for bubbles from both sides of the glass.
-
6
Use a utility knife or a razor blade to trim the excess film from around the edges. Squeegee again around the edges to smooth them completely.
-
1
References
Resources
- Photo Credit Comstock Images/Comstock/Getty Images
