How to Sync New Devices to My BlueAnt Bluetooth Handsfree
The BlueAnt S4 Bluetooth handsfree device is a speakerphone designed to attach to the visor in your car. The S4 comes with a number of voice controls for making and receiving calls, adjusting the device settings and updating your phone book, all without using your hands. The S4 uses multipoint technology which lets you connect two devices at the same time, and make or receive calls on both. While the S4 enters pairing mode automatically for the first phone, to connect a second device, instruct the speakerphone to enter pairing mode.
Other People Are Reading
Instructions
-
-
1
Slide the power switch, located on the side of the handsfree unit, away from the port to turn on the device.
-
2
Say "BlueAnt speak to me." After a moment, the device responds with "Say a command." Say "Pair me" to put the S4 into pairing mode.
-
-
3
Turn on Bluetooth technology on your new device by going to the "Bluetooth" menu, usually located under the "Main," "Settings" or "Tools" menus.
-
4
Search for new Bluetooth device on your phone using the "New," "Add" or "Search" commands in the "Bluetooth" menu. A list of all nearby Bluetooth devices appears; choose the BlueAnt S4 from the list.
-
5
Enter in "0000" when you are asked for a PIN or passcode. Your second device is now paired, and will connect automatically. You should be given the option to make the S4 a trusted device on your phone. Select "Yes" to have this device automatically connect to the S4 when it is in range.
-
1
Tips & Warnings
Your first device will lose its connection to the S4 as soon as you put the S4 into pairing mode. If you do not have the device set up to automatically reconnect, you will have to manually reconnect the first device once you finish pairing the second one.
Whenever you connect both devices to the S4, whatever device you connected first becomes the "primary" device. If you use the S4 voice control to interact with a device, it will always interact with the primary device.
