How to Wire a Kicker S15L5
Kicker's L5 subwoofers are distinguished by their square shape and strong output. Adding a 15-inch L5 subwoofer to your system is an excellent way to boost the sound power of your car audio system, and with a few simple materials and tools you can have your sub pounding in no time.
Other People Are Reading
Instructions
-
-
1
Loosen the speaker output terminals on the end panel of your car amplifier with a screwdriver. There are two, marked "+" and "-."
-
2
Pull apart the two leads on the end of a roll of speaker wire. Remove 1/2 inch of insulation from the ends of each of the leads with a set of wire strippers. Identify the positive lead of the speaker wire by a series of "+" signs on the jacket.
-
-
3
Slide the end of the positive speaker wire lead into the "+" speaker terminal on the amp and tighten the screw. Put the other lead into the "-" terminal and tighten the screw.
-
4
Roll out the speaker wire until it reaches the subwoofer. Cut the wire to length and prepare the two speaker wire leads as you did on the other end.
-
5
Push the red terminal post of the subwoofer in until a hole appears. Insert the bare end of the positive speaker wire lead into the hole and release the terminal. Insert the other lead into the black terminal post.
-
1
