How to Make Sand Dunes for a School Project

Save

A sand dune is a hill of loose sand built by wind processes also known as eolian processes. Sand dunes are found in deserts and coastlines around the world. The science behind forming sand dunes involves two elements: sand and wind. Wind provides energy strong enough to move the grains of loose sand. An item of obstruction used as a stabilizer such as a tree, a large rock or shrubs often stop the sand from a continuous blowing motion and the sand begins to pile up to form dunes. This can be demonstrated in a simple sand dune project.

How to Make Sand Dunes for a School Project
(Anne Dale/Demand Media)

Things You'll Need

  • 1 cup of dry play sand
  • Shallow container such as baking pan or shoe box
  • Drinking straw
  • Rock or other object with flat bottom
Step 1

Prepare the work area by covering a table with plastic table cloth or newspapers.

Anne Dale/Demand Media
Step 2

Pour play sand into a shallow container such as a baking pan or shallow shoe box. A 9-by-11-inch container that is at least 2 inches deep works well. A shoe box with a lid is a good choice for a classroom presentation because it is easy to transport.

Anne Dale/Demand Media
Step 3

Push away an area in the center of the container to make room for the rock. Place a rock or other object with a flat bottom inside container. An object that measures no more than 1 inch tall works well to create a solid stabilizing point for the sand.

Anne Dale/Demand Media
Step 4

Shake the container gently until the surface of the sand is smooth and flat using care not to shift the rock out of place. Set the container on a flat surface and hold the rock in place as you gently tap the sides of the container.

Anne Dale/Demand Media
Step 5

Blow gently through the drinking straw to move the sand toward one side of the rock. Depending on the amount of air provided in each breath, it will take several breaths to move the entire cup of sand to form a dune. Keep the straw just above the surface of the sand and make long soft blows through the straw.

Anne Dale/Demand Media
Step 6

Remove the straw from your mouth before each additional breath to avoid sand getting into your mouth or airways and to prevent too much saliva from building up inside the straw. If the sand becomes wet, it will not easily move. As you continue to blow, a sand dune will form on one side of the rock.

Anne Dale/Demand Media

Tips & Warnings

  • Straws with larger openings or several children blowing on the sand at the same time will speed up the process.
  • For a variation, use different sized granules such as sugar, salt, sea salt, dried mashed potatoes and watch what effect it has on the peaks when the wind hits them.
  • Remove straw from mouth before inhaling so sand is not ingested.
  • If sand gets in your eyes, immediately flush with water

References

Promoted By Zergnet

Comments

Resources

Related Searches

Check It Out

Can You Take Advantage Of Student Loan Forgiveness?

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!