Instructions for a Plasti-Kote Rust Converter

Save

Plasti-Kote is a rust converter solution. Rust is traditionally removed by scraping and priming. However, Plasti-Kote converts the rust into harmless chemicals and creates a protective film on the surface so there is no need for scraping. Rust converters are commonly used on automobile surfaces. You can apply Plasti-Kote rust remover by following a few techniques.

Things You'll Need

  • Brush
  • Dishwashing soap
  • Remove loose rust from the affected area with a clean, bristled brush. This will prevent any loose rust from getting sealed into the affected areas when applying the rust remover.

  • Clean the rusted area with mild dishwashing soap and water then let dry. Apply a degreaser. This will prevent surface contaminants from interfering with the reaction of the rust converter.

  • Dip the applicator brush into the solution then apply an even coat to the rusted areas. It will take 24 hours for the rust converter to fully dry.

  • Apply a second coat of Plasti-Kote. Wait another 24 hours for the rust converter to completely dry before painting.

Related Searches

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!