How to Reset the Oil Change Notice on a 2010 Toyota Highlander

Save

Toyota released the mid-sized Highlander in the 2001 model year. In 2008, Toyota completely redesigned the Highlander, giving it sleeker headlights and body lines. The 2010 Highlander came standard with a 2.7-liter four-cylinder engine that produced 187 horsepower. It had an optional 270-horsepower, 3.5-liter V-6 engine available, as well. Toyota fitted the 2010 Highlander with a maintenance reminder system that alerted the driver that an oil change is due via a "Maint Reqd" light. Resetting this light is a short, yet precise process.

Without Smart Key System

  • Turn the ignition to the "On" position. Press and release the trip meter reset stalk until the odometer display shows trip meter A. Turn the ignition to the "Lock" position.

  • Press and hold the trip meter reset stalk and turn the ignition to the "On" position, without starting the vehicle.

  • Observe as the "Maint Reqd" light extinguishes.

With Smart Key System

  • Turn the "Engine Stop/Start" switch to the "Ignition On" position, without starting the SUV. Press and release the trip meter reset stalk until the odometer displays trip meter A. Turn the "Engine Stop/Start" switch to the "Off" position.

  • Press and hold the trip meter reset stalk. While holding the stalk, turn the "Engine Stop/Start" switch to the "Ignition On" position, but don't start the engine.

  • Observe as the trip meter reads "000000," indicating you reset the system correctly. If fitted with the multi-information display, "Complete" appears on this screen instead of "000000" on the trip meter.

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Read Article

How to Clean Your Car Headlights

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!