How to Repair an Oil Painting With Cracked Paint Yourself

Save

Unsightly cracks on the surface of an oil painting damage its color and quality and occur when the surface beneath the paint deteriorates. Repairing cracked paintings restores them to their original state. The process, which can be done at home, involves strengthening the surface with a beeswax and damar resin mixture that prevents further deterioration and glues the paint to the stronger base.

Things You'll Need

  • Strips of hard linoleum
  • Gas burner
  • Small saucepan
  • Damar resin
  • Beeswax
  • Eyedropper
  • English turpentine
  • Meat thermometer
  • Small paintbrush
  • Metal palette knife
  • Cup
  • Hot water
  • Clean cotton rag
  • White flour
  • Cold water
  • Japanese tissue paper
  • Gauze
  • Heavyweight archival paper
  • Clothes iron
  • Wax paper
  • Spray bottle
  • Distilled water
  • Clean natural sponge
  • Place the canvas face-up on a dust-free table. Pile small strips of hard linoleum under the cracked areas of the canvas to create a support to protect the painting from further damage during repair.

  • Heat 1/4-cup damar resin over a low flame until it dissolves. Stir 1/4-cup beeswax slowly into the dissolved resin. Continue to stir over heat until blended, then turn flame off. Fill the eyedropper with English turpentine. Add three drops to the mixture. Stir to blend, then cool to 170 degrees Fahrenheit.

  • Load a small paintbrush with the 170-degree mixture. Apply liberally to the cracked areas of the painting. Poke the tip of the paintbrush gently underneath and between the cracks to saturate the front and back sides of the paint with the glue.

  • Heat the metal palette knife in a cup of hot water, then dry on a clean cotton rag. Press the flat side of the palette knife gently on to the saturated paint. The heat and pressure glue the saturated paint to the backing. Allow to dry and cool.

  • Mix 1 cup of white flour and 1 cup of cold water to create a paste. Apply a thin layer of the paste over the glued areas of cracked paint. Cover the pasted area with Japanese tissue paper torn to fit. Allow to dry. Apply a second layer of paste over the tissue paper, and cover with gauze. Allow to dry. Cover the gauze with paste, then attach a piece of heavyweight archival paper over the gauze. Allow to dry, cover with paste, then attach one more layer of heavyweight paper.

  • Lay the canvas face-down on a table covered with cloth. Heat the damar-beeswax-turpentine mixture to 170 degrees. Paint the glue on the back of the canvas behind the cracked areas of paint clearly visible as slightly darker than the rest of the canvas. Warm a dry iron to medium heat. Lay wax paper over the back of the canvas, and iron the glued areas to further flatten and attach the cracked paint to the surface. Turn off the iron. Peel off the wax paper. Allow to cool and dry.

  • Turn the canvas face-up on the table. Add supports underneath as described in Step 1. Spray the top layer of heavyweight paper with distilled water to dissolve the wheat-paste glue. Peel off the paper. Spray, then remove the second layer of heavy paper and the gauze. Spray the Japanese tissue paper with water, then wash off the paper and paste gently using the sponge.

References

  • Photo Credit Photos.com/Photos.com/Getty Images
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!