Archery target butts have to accomplish two basic tasks: they must stop the arrows and they must allow the arrows to be easily removed from the target. Excellent targets can be constructed using a variety of low cost and readily available materials. One of the most common methods is to use several standard, rectangular hay bales.
Things You'll Need
- 4 hay bales
- Nylon rope
Place a hay bale at your desired target location. Hay bales are much more effective at stopping arrows if they are properly oriented. Arrows will sink too far into the bale if they are shot into the sides of the bale where the cut ends of the hay are visible. To avoid this, the bale should be set so that the largest rectangular face of the bale will form the face of the target butt.
Place a second bale on top of the first bale with the same orientation. Assemble the next two bales in the same manner behind the first two bales.
Wrap a section of the nylon rope around the circumference of the top two bales. Pull the rope as tight as possible and knot it to secure the top two bales securely together. Use the knife to cut off any extra rope at the ends. Repeat this process for the bottom two bales.
Tips & Warnings
- To extend the life of the archery target butt, cover it with a waterproof tarp when it isn't being used.
- Photo Credit Kim Steele/Photodisc/Getty Images
How to Build an Archery Target for a Compound Bow
The world of archery is very diverse with many different sizes and styles of bows and arrows to choose from. From primitive...
How to Build an Archery Target Backing
It is possible to construct a high performance, highly reusable, archery butt (target backing) for little or no money using materials that...
How to Make an Inexpensive to Free Archery Target
Archery can be enjoyed by enthusiasts for sport or as a good alternative to hunting with a gun. A well-made target can...
How to Make a Self Healing Archery Target
"Self-healing," targets are a misnomer: Genuinely self-healing materials are very expensive polymers that return to their original state when heated, but none...