The Genie GR 390-12, or Genie Receiver 390 12-switch, is the part of a garage door opener that receives wireless signals from Genie 12-switch remotes and keypads. It consists of a small receiver box with three wires attached to it. These receivers are used by Genie screw drive units Pro 88-S, Pro 98-S and Pro 90-S. They are called 12-switch receivers because of the set of 12 tiny switches used to set the fixed code signal that opens and closes the garage door. The GR 390-12 is a replaceable part if it malfunctions.
Things You'll Need
- Phillips head screwdriver
- Small flat-head screwdriver
Unplug the Genie garage door opener. Remove the lens cover that covers the light bulbs. Note the six screws labeled one through six. Remove the white wire with the U-shaped connector from screw one. Leave the other wire on screw one. Remove the black wire from screw two and the red wire from screw three. There shouldn't be any other wires on screws two and three.
Remove the screws that hold the GR 390-12 receiver box to the garage framing. Mount the new receiver box in the same spot.
Slide the white U-shaped wire connector around screw one. Slide the black wire connector around screw two and the red wire connector around screw three. Tighten all three screws to secure the wires.
Open the cover of the receiver box by squeezing the two long sides of the box casing. Slide the small 12 switches either up or down with the screwdriver so they match the 12 switches found inside the remote control. Plug your garage door opener back in.
Tips & Warnings
- A GR 390-12 will not work on a Genie unit that didn't come with one. It also will not work on any other brand of garage door opener.
- "Level 2 Support Guide"; AC Clutch Model Screw Drive External Radio; Feb. 16, 2009
- Photo Credit Thinkstock Images/Comstock/Getty Images
Genie Keyless Entry Instructions
There are three basic types of Genie Keyless Entry systems, including two Intellicode Keyless Entry Systems and the Wireless Keypad Entry System....
How to Oil a Genie Screw Drive
One of the advantages of a Genie screw drive opener is how quiet the opener operates. Unlike a chain driven opener where...
How to Replace My Genie Screw Drive Bulb
The Genie Screw Drive garage door opener is a convenient way to open and close your garage door without having to operate...
How to Change a Light Bulb on a Genie Garage Door Opener
The Genie garage door opener is a reliable addition to your garage. One push of the remote control button and your garage...
How to Lubricate a Genie Garage Door Opener
Purchase a lubricant recommended for the Genie garage door opener. Because the Genie has screw drives, you cannot use the same type...
How to Program a Genie Intellicode Remote Control
A garage door operator is a helpful convenience that can spoil us quickly, especially when the weather is bad. The remote control...