How to Rescan With the Sharp Aquos Digital TV

Techwalla may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.
How to Rescan With the Sharp Aquos Digital TV
Image Credit: fuzznails/iStock/Getty Images

When you turn the Sharp Aquos TV on for the first time, you'll be prompted to scan for available channels over the air. However, if you don't have your antenna positioned properly, or don't have an antenna connected at all, you may not pull in the number of channels you were hoping for. If you want to go back later after adjusting the position of the antenna to try and pull in more channels, you might have some trouble getting back to the screen where you perform the scan. You can perform a re-scan through the EZ Setup part of the menu.

Advertisement

Step 1

Connect the end of the cable associated with your over-the-air antenna into the ANT/CABLE connector in the lower left corner on the back of the Sharp Aquos TV, and make sure the connection isn't loose. Ensure there are as few objects as possible obstructing the antenna. Additionally, avoid laying the antenna on the ground, and consider hanging the antenna to help prevent obstruction.

Advertisement

Video of the Day

Step 2

Press "Menu" on the TV's remote control. Press the Left or Right arrow button until Setup is selected, then push "Enter."

Step 3

Select "EZ Setup" from the list of options and then choose "Air/Cable."

Advertisement

Step 4

Choose "Air." Use the Left and Right arrow buttons on the remote to highlight Start, then press "Enter." The TV will perform a scan for available signals, which may take a few minutes to complete. When the channel scan is complete, an overview of the number of channels found will be presented.

Advertisement

Step 5

Select "OK" after the channel scan is complete to exit the menu.

Video of the Day

Advertisement

Advertisement

references

Report an Issue

screenshot of the current page

Screenshot loading...