How to Disassemble a Remington Electric Chainsaw
Remington electric chainsaws require regular disassembly to clean and repair the chainsaw. Disassembly is also required for chain and bar maintenance, which should be done after each use, as dirt, sawdust and oil will interfere with the chainsaw's operation. However, nobody other than trained professionals should attempt to disassemble a chainsaw's electric motor and engine components. These engines carry lethal voltage and electrocution may occur in untrained users. Always wear protective gloves when handling a chainsaw. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Unplug the electrical cord from the extension cord. Loosen the guide bar nuts with the wrench so they are finger tight. Loosen the bar adjusting screw, on the front of the power head, counterclockwise until the chain sags beneath the bar.
-
2
Remove the bolts with your fingers. Pull the guide bar cover off the mounting posts. Pull the chain away from the drive sprocket and lift the bar and chain off the engine.
-
-
3
Unscrew the guide bar bolts from the front hand guard and pull them out of their holes. Unscrew the tapping screw from the hand guard. Take the hand guard off the chainsaw body. Reassemble parts in reverse order.
-
1
