How to Set Up an Easy Shaper
The Easy Shaper is an in-home workout machine that looks like a weight bench sitting directly on the floor. You push a U-shaped bar, which attaches to the bench with resistance bands, from different positions to work your abs, glutes and legs. When you first get your Easy Shaper device, you will have to set it up. However, you don't need any tools; the device includes all the necessary hardware for set-up.
Other People Are Reading
Instructions
-
-
1
Position the U-shaped bar, which is called the leg assembly, at the front of the machine with the foam handle at the top.
-
2
Pull out the pop pin on one side of the leg assembly and lift the link bar until it slides into the recess on the leg assembly. Release the pop pin. Make sure it slides into the link bar. Repeat on the other side.
-
-
3
Slide a washer onto one of the 3/8-inch bolts. Line the hole in the leg assembly bar, which is below the pop pin, up with the hole in the frame bracket. Push the bolt through the bracket and the leg assembly bar. Slide a second washer and a nylon nut on the end of the bolt. Tighten the bolt and nut with the included wrenches. Repeat on the other side.
-
4
Turn the Easy Shaper on its side. Position the plastic corner cover over the leg assembly and frame bracket. Line up the holes in the cover with the holes on the bottom of the unit and screw in two short feet. Repeat on the other side.
-
5
Screw the two long feet into the the holes on the top of the head rest frame.
-
1
Tips & Warnings
Make sure the U-shaped bar, or leg assembly, curves toward the front of the unit, away from the weight bench.
Tighten all the nuts and bolts before you use the device for the first time.
Consult your doctor before starting a workout program.
