How to Frame a Canvas Board

Save

Framing canvas boards is something the avid painter or frugal artist needs to know how to do. Building your own canvas frame is much cheaper than purchasing one outright. In fact, as of May 6, 2011, a small canvas board can be built for less than $10. All the builder needs are a few pine boards and a sheet of canvas. If the materials are bought in bulk the builder can save even more money. Framing canvases is not a complicated task, and it gets even easier with practice.

Things You'll Need

  • Tape measure
  • 2 pine boards, 1-by-1-by-13 inches
  • Compound miter saw
  • Staple gun
  • 64 staples, 3/4-inch
  • Canvas, 19-by-19 inches
  • Cut the ends of the 13-inch boards at a 45-degree angle. Do not alter the original length of the boards. When the boards lie flat they should resemble the shape of a trapezoid.

  • Lay the boards flat so they make a 13-by-13-inch square. The angled cuts should be against each other and the corners should be flush. Staple two staples over each of the joints where the cut edges are against each other. This will hold the boards together while you stretch your canvas.

  • Lay your canvas flat and set your frame on top of it so each edge of the canvas is 3 inches away from the corresponding side of the frame. Fold the top horizontal edge of the canvas over the frame and staple it down from left to right using one staple every inch. The canvas should lie tight against the frame for this process as you work from left to right.

  • Fold the bottom horizontal edge of the canvas up and over the frame and staple it down using the same process as you did for the top edge.

  • Rotate the frame 90 degrees and repeat the 3rd and 4th step. Fold the corners of the canvas down and staple them to the frame.

References

  • Photo Credit Jupiterimages/Brand X Pictures/Getty Images
Promoted By Zergnet

Comments

You May Also Like

  • How to Make a Canvas Frame

    At some point in his life, any artist who uses canvas will have to make a canvas frame. The good news is...

  • How to Make a Canvas Boat Cabin

    Adding a cabin to an open boat can be an expensive project -- or not. With some PVC pipe from the hardware...

  • How to Frame Canvas Paintings

    Canvas paintings require more care and attention when it comes to framing because of their thick, yet delicate surfaces. Learn more about...

Related Searches

Check It Out

12 Tiki Essentials to Turn Your Bar Cart Into a Tropical Paradise

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!