The 825Y is a backflow prevention device manufactured by Febco. A backflow prevention device, also known as a reduced pressure zone assembly, is used in hazardous applications where the risk of backflow into a water supply may be harmful. The device is used to prevent the contamination or pollution of water supplies. Water is normally kept pressurized to facilitate flow, as used commercially and in homes. If the water supply loses pressure for some reason, such as frozen water pipes breaking, the backflow prevention device will protect the water supply from contamination.
Things You'll Need
- Clean cloth
- Torque wrench
Inspect the disc holder and stem guides, located on the top of the backflow device, for foreign debris. An obstruction which prevents the discs or stems from moving freely might cause the relief valve to discharge continuously during a no-flow condition. Clean the disc holder and stem guides with a clean cloth.
Ensure that the center bolt on the main stem does not exceed 15 inch-pound torque using a torque wrench. A jammed main stem due to excessive torque may cause the relief valve to discharge continuously during flow and no-flow conditions. Excessive center bolt torque can also damage other components of the backflow prevention device.
Inspect the diaphragm retaining screw for leakage. If leakage is present, extract the screw using a screwdriver, and apply a layer of sealant on all the threads. Reinsert the screw. An improperly sealed diaphragm retaining screw can cause discharge from the drain hole in the relief valve spacer.
How to Repair a Leaking Backflow Preventer in a Sprinkler System
Pressure vacuum breakers, or backflow prevention devices, keep the water that has already entered sprinkler lines from flowing backward into the main...