Plan the perfect garden with our interactive tool →

How to Troubleshoot a Porter Cable Generator

In parts of the Unites States with the risk of experiencing a natural disaster, an electric generator is a must. Electric generators output a specific amount of wattage; the bigger the generator, the more wattage it can produce. Porter Cable produces a few different generator models, all of which run on gasoline engines. If your generator begins to experience problems, the steps used to troubleshoot the generator remain the same.

Unplug any electrical appliance connected to the generator before proceeding. Check the fuel level if the engine will not start. If the fuel is full and the engine will not start, check to ensure the “On/Off” switch is “On” and that the fuel valve is open. If this does not work, check to ensure the engine choke is in the right position, then try starting the engine again. If this doesn’t work, check whether the spark plug wire is securely attached to the spark plug. If you still haven't found the problem, remove the spark plug wire and unscrew the spark plug from the engine block using a spark plug tool, and install a new plug of the same model. Always keep an extra spark plug on hand labeled “generator” so you can easily identify it during a power outage.

  • In parts of the Unites States with the risk of experiencing a natural disaster, an electric generator is a must.
  • If this doesn’t work, check whether the spark plug wire is securely attached to the spark plug.

Press the "Reset" button on the GFCI breaker or the circuit breaker if the generator is producing no electrical output. If the power cord connected to the Porter Cable generator has become cut, frayed or damaged in any way, replace it. If the generator still fails to produce any electrical output, the receptacle or the capacitor may be faulty; only have these parts replaced by a Porter Cable Service Center.

Disconnect electrical appliances if the circuit breaker trips over and over again. Reducing the load should remedy this problem. Check whether one or more of the cords feeding the appliances has become frayed or damaged in some way. Repair or replace the cords before connecting them to the generator.

  • Press the "Reset" button on the GFCI breaker or the circuit breaker if the generator is producing no electrical output.
  • If the generator still fails to produce any electrical output, the receptacle or the capacitor may be faulty; only have these parts replaced by a Porter Cable Service Center.

Reduce the load on the generator by unplugging one or more electrical appliance if the engine overheats. If the generator is overloaded, it will try to keep up and overheat in the process. Also, the generator may not be located in an adequately ventilated area. Move it into an open outdoor location for adequate ventilation.

Tip

Always keep the owner’s manual for your generator in a handy place so you know where to find it if you experience an extended power outage.

Regularly test your Porter Cable generator to ensure it will work properly during a power outage.

Related Articles

How to Diagnose Starter Problems for a John Deere Lawn Tractor
How to Diagnose Starter Problems for a John Deere Lawn...
How to Wire a Briggs & Stratton Alternator
How to Wire a Briggs & Stratton Alternator
Honda Rancher Winch Install
Honda Rancher Winch Install
How to Test the Cub Cadet 2135 Solenoid
How to Test the Cub Cadet 2135 Solenoid
The Starter Relay and Why a Mower Won't Start
The Starter Relay and Why a Mower Won't Start
How to Test a Lawn Mower Battery
How to Test a Lawn Mower Battery
How to Check Compression on a Lawn Mower Engine
How to Check Compression on a Lawn Mower Engine
My Ryobi CS26 Won't Start
My Ryobi CS26 Won't Start
How to Test the Ignition Module for John Deere Lawn Tractors
How to Test the Ignition Module for John Deere Lawn...
Poulan P3314 Chainsaw Troubleshooting
Poulan P3314 Chainsaw Troubleshooting
My Troy Bilt Snowblower Is Stalled Out & Will Not Start
My Troy Bilt Snowblower Is Stalled Out & Will Not Start
Hydrostatic Problems in Yard Machines
Hydrostatic Problems in Yard Machines
Garden Guides
×