How to Insert a Liquid Into an E-Cigarette


e-Cigarettes are exploding in popularity as a less-risky, inexpensive way for smokers to deal with their habit. They atomize or heat a flavored liquid containing some nicotine, which is inhaled. The result is odorless, dissipates instantly, and can be a satisfying replacement for traditional cigarettes. All e-cigarettes are composed of a battery, an atomizer and a way to deliver liquid. There are two types of atomizer-delivery systems available; cartridges and cartomizers. Cartridge systems use a separate atomizer, while cartomizers combine the cartridge and atomizer by permanently inserting the atomizer into the cartridge area. There are different ways to refill each with fluid.

E-Cigarette Cartridges

  • Grasp the atomizer portion of the e-cigarette and gently twist the mouthpiece. The cartridge should come loose and then it can be removed.

  • Turn the cartridge upside-down and check the filler material for dampness, and to see if it's burned. If it is burned, discard the cartridge.

  • Drip fluid into the cartridge material slowly, until it is wet, but not pooled. Too much fluid will flood the atomizer and make the e-cigarette nonfunctional, until the excess fluid is cleared.

  • Press the cartridge back into place gently, pushing until it snaps. Check for any leakage of fluid as this can be a sign of flooding.

E-Cigarette Cartomizers

  • Remove the cartomizer -- grasping the battery end firmly and untwisting the cartomizer/mouthpiece portion. Nothing else should be removed as it is all one piece.

  • Hold the cartomizer so the end that screws into the battery is facing up. Do not try to fill from the mouthpiece side, as it contains a silicone plug that keeps fluid from getting into your mouth while inhaling.

  • Cover the hole on the mouthpiece side and slowly drip fluid into the battery side hole. Let each drop soak in before continuing. When it is full, the liquid will pool in the reservoir around the hole.

  • Let your finger off of the mouthpiece hole and let gravity drain the last drop or two from the reservoir into the cartomizer. If fluid drops through onto your bottom finger, gently puff through the mouthpiece side of the cartomizer into a napkin a couple times to clear the excess fluid and prevent flooding.

  • Screw the cartomizer back onto the battery and check for any leaks. Do not over-tighten, as the threads on e-cigarettes are not meant for stress.

Tips & Warnings

  • If you overfill, you can puff extra fluid out or take a couple puffs from the atomizer to burn off the extra.
  • Let your e-cigarette sit a few minutes after refilling to let the fluid soak in.
  • Refill as soon as vapor production drops, or you get a burnt taste.
  • Do not use an e-cigarette when dry. It will ruin your atomizer or cartomizer.
  • Do not refill a cartomizer when still attached to a battery.

Related Searches


  • Photo Credit Jupiterimages/ Images
Promoted By Zergnet


You May Also Like

  • How to Clean An Electronic Cigarette

    Electronic cigarettes are an alternative to smoking tobacco, not necessarily an aid to stop smoking. They look similar to standard cigarettes, but...

  • How to Refill Electronic Cigarette Cartridges

    Electronic cigarettes are a new fad that has been sweeping the smoking world. Instead of using the old-fashioned method of actually lighting...

  • How to Do a Liquid Diet

    Liquid diets often work for weight loss, solely based on the principle of "calories in-calories out" -- meaning that if you consume...

  • How Is Menthol Added to Cigarettes?

    Smoking cigarettes is known to increase chances of lung cancer, mouth cancer, heart disease and respiratory diseases. The effect of a cigarette...

Related Searches

Check It Out

This Is the Beauty Routine of a Yelp Sales Manager

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!