How to Fly a Two String Kite

Save

One-string kites are simple to fly, but two-string kites take a little bit more skill and finesse to keep in the air. Two-string kites, or stunt kites, are exciting to fly because they are more interactive than single-string kites and they can perform tricks. The most common stunt kite design is the delta kite, named for its triangular shape. Delta stunt kites have two, or sometimes four, strings to control the kite in the air.

Things You'll Need

  • Stunt kite
  • Kite string
  • Winder
  • Open field
  • Helper (optional)

Setup and Fly a Stunt Kite

  • Assemble your kite. Insert the leading edge poles into the nose piece. The leading edges are the top poles of the kite frame that touch the wind first. Insert each end of the spreader into the connector pieces on the leading edge polls. The spreader is the part of the frame that holds the kite open in its assembled position. Finally, connect the standoffs to separate the spreader from the sail, which is the fabric part of the kite.

  • Attach the kite to the flying lines. The bridle of the kite is the cord attaching the frame to the kite strings, or flying lines. Tie a loop in the end of each flying line. Pull the loop through itself to create a simple slipknot, or larks head knot. Stunt kite bridals have two sections of cord with a knot at the end called the tow lines. Loop the slipknot in the kite string over the knot in the tow line and pull it tight. Repeat for the other tow line and string.

  • Take your kite outside to an open area free of obstacles. Get a friend to hold your kite upright with her face to the wind. The flying lines wrap around two winders. Hold one winder in each hand, making sure there are no twists in the lines. Stand with your back to the wind and step backward 30 to 50 feet, letting the kite strings unwind as you go.

  • Set your flying line length. Ensure the lines are the same length, then wrap each kite string around a tab on its winder to keep it from unwinding more.

  • Launch your kite. Have your friend toss the kite straight up into the air. When it catches the wind, pull gently on the winders to make it go faster and higher into the air.

  • Land your kite. Fly the kite to the edge of the wind. This means that the kite is no longer perpendicular to the wind but at an angle and it will slow and move downward. Gently bring your kite to the ground by slowly stepping forward.

  • Launch your kite without a helper. Secure the winders to the ground then walk to the kite and position it on its back with its nose pointing away from you. Walk back to the winders and take one in each hand. Firmly but smoothly pull the lines and take a few steps back at the same time. With enough wind and proper technique, the kite will take off.

  • Steer your kite. Pulling on both winders or stepping back makes the kite fly faster. Pushing the winders or stepping forward slows it down. To turn the kite to the right, slowly pull your right hand back. To turn it to the left, pull your left hand back. These are all of the movements necessary to perform kite stunts.

Tips & Warnings

  • Beginner stunt kites fly best in low to moderate wind, between 3 to 15 mph. The heavier the kite, the more wind it needs to fly.
  • Use smooth, calm arm movements to fly a kite. Jerky or abrupt movements may cause you to lose control of your kite.
  • When attaching the flying line to the bridal, tie a small loop in the end of the larger loop at the end of the flying line. This little loop acts as a handle to easily disconnect the kite from the string.
  • Always be aware of obstacles on the ground and in the air, particularly people on the ground. It is your responsibility as the kite flier to protect the safety of people around you. It is not their responsibility to move out of the way of a crashing kite.
  • For your safety, do not fly kites near power lines or over trees.

References

  • Photo Credit A J James/Digital Vision/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

  • How to Make a Kite

    The leaves are rustling in the trees and the spring breeze is calling us out to fly a kite! Yes! It is...

  • How to Fly a Kite

    A windy day in the park might keep you from flying a paper airplane outdoors, but it could be the perfect day...

  • How to Fly Two Line Delta Kites

    Learn how to fly two line delta kites in this free video from a kit flying expert!

  • How to Wind Kite String

    Need kite flying tips? Learn how to use string winders in this free video clip from a professional kite flyer.

  • Making a Kite: Support String

    Support strings serve as the connection between your kite and the roll of string. Learn how to make a kite in this...

  • Making a Kite: Attach Roll of String

    Find the midpoint of the support string and use that as a guide for where to tie the roll of string. Learn...

Related Searches

Check It Out

10 Delicious Game Day Eats That Rival the Game

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!