How to Paint With Air Brushes
Airbrushing is a painting method that produces dazzling effects through atomizing paint and propelling it under pressure. Because there is no brush, the methods you use to apply paint to a surface in a way that produces desired effects will be different from most other painting methods. If you are new to the world of airbrushing, there are a few basics you need to learn to begin painting.
Things You'll Need
- Airbrush
- Rubber hose
- Compressor
- Paint
- Canvas
- Heavy-weight paper
- Scissors or hobby knife
Instructions
-
Instructions
-
1
Connect the air compressor to the airbrush using the rubber hose and activate them according to your user's manual.
-
2
Hold the airbrush perpendicular to the canvas or surface on which you are painting, with the nozzle about six inches away from the surface.
-
-
3
Using a sweeping motion, begin moving the brush across the canvas before activating the finger lever.
-
4
Continue to use constant motion as you release paint from the nozzle. This will help to create uniform paint strokes and avoid buildups or uneven coloration.
-
5
Adjust the size of brush strokes and paint concentration to suit your intended design effects by modulating the finger lever. Pulling the lever all the way back will create thick, color-saturated strokes, while toggling it only slightly will produce fine, lighter lines. Use a combination of both strokes to create effects.
-
6
Use the scissors or knife to cut shapes and borders into the paper. You can then use the paper as a stencil or template to create various effects on the canvas. You can also purchase ready-made stencils through airbrush supply outlets or hobby stores.
-
7
Experiment with various painting strokes by adjusting the distance of the nozzle from the canvas, the speed and motion of the stroke, and the amount of color applied. You can even vary these factors within a single stroke to create shapes. For example, you could start the stroke far from the canvas releasing a lot of color, and as you end the stroke move closer to the canvas while decreasing color to make a dagger shape.
-
1
