Ratchets are used in conjunction with sockets to tighten or loosen nuts and bolts. Ratchets come in four common sizes, 1/4-, 3/8-, 1/2- and 3/4-inch drive. The size refers to the width of the rotating metal square peg at the end of the ratchet that fits into a corresponding square hole in one end of the socket. The square peg on the ratchet has a small, metal ball on one of the side faces of the peg, which fits into a detent in the socket. Sometimes this ball-detent system can become stuck in the out position while a socket is stuck on it, making the socket almost impossible to remove.
Things You'll Need
- Lubricating oil
Look at your ratchet and determine if it is a quick-release model. If your ratchet has a button on the top of the end where the socket attaches, you have a quick-release ratchet. Depress the button to release the socket and pull it off.
Pull hard on the socket to remove it, if your ratchet is not the quick-release type.
Clamp the socket and wrench in a vise, if your socket is still stuck on -- on either a quick-release or a regular ratchet -- with the socket coming in from the side and the ratchet handle parallel to the floor.
Hold the end of the ratchet handle and hit middle of the ratchet handle with a hammer until the ratchet releases.
Tips & Warnings
- To help prevent sockets from getting stuck, lubricate the ball-detent system of the ratchet with some penetrating oil like WD40. Using the accompanying red hose, squirt the oil around the edge of the ball and into the ball's recess. Put a pair of pliers around the ratchet's square peg and use them to squeeze the ball into its recess. With the ball in its hole, squirt in some more lubricating oil. Release and compress the ball-detent system with your pliers several times to break up any corrosion in the system.
- Store your ratchet in a dry, clean place to minimize the risk of the ball-detent system becoming stuck again. Do not store the ratchet with a socket still on it.
- "Maintaining Your Tools"; Ian Young; 1975
- Photo Credit Ablestock.com/AbleStock.com/Getty Images
How to Remove Stuck Rear Rotors on an Expedition
There are a couple different reasons why the rear rotors on your Ford Expedition are stuck to the hub. Depending on your...
How to Loosen a Ratchet Strap
In a typical ratchet strap, the ratchet plate, which serves as the ratchet mechanism, will have a thumb-hole or tab placed near...
How to Use a Ratchet
Ratchet wrenches are a staple of all mechanics. With a good set of sockets, you can handle any bolt or nut on...
How to Release a Ratchet Style Tie Down
Ratchet-style tie downs come in payload strengths suitable for anything from home use to heavy-duty industrial applications. Ratchet tie downs typically separate...
How to Release a Stuck Parking Brake
In many vehicles, the parking brake can get stuck if left engaged for a long period of time, or if subjected to...
How to Remove the CV Axle in a Mitsubishi Mirage
The CV axle that connects the transmission to the wheels on a Mitsubishi Mirage is a device whose purpose is to enable...
How to Remove a Stuck Socket Or Wrench
It is not uncommon to get a socket or wrench stuck onto the head of a bolt. This happens when the head...
How to Replace the Head Gasket on a 1998 Jeep Cherokee
As a motorist, being able to identify signs of trouble with your car is a must, such as a blown head gasket....
How to Replace the Fuel Pump on a 1996 Park Avenue
The 1996 Buick Park Avenue was available in two different models: the base model Park Avenue, and the Park Avenue Ultra. Both...
How Do I Relieve a Jammed Hip Joint?
Age, illness and injury are all sources of irritation surrounding the joint of your hip. If the irritation reaches extreme levels, the...