How to Calculate the Speed of an Elevator

Save

Elevators don't travel at the same rate during their trips because they have to accelerate to full speed initially then decelerate at the end. You can estimate the average velocity, however, if you know how far the elevator has to travel and how long it takes to traverse that distance. Typically, you can't actually go inside the building and measure the height of each floor -- it wouldn't be practical to do so.

Things You'll Need

  • Pencil
  • Paper
  • Calculator
  • Stopwatch
  • Count the number of stories in the building and subtract one, since the bottom of the elevator will travel all the way to the bottom of the top floor. Enter the number of stories into the building height calculator at the Council on Tall Buildings and Urban Habitat website. This will give you an approximate height. Please keep in mind that this number is certainly not exact, but it will suffice to get a rough idea of the elevator's speed.

  • Take the elevator all the way to the top floor of the building. On the way, time how long it takes to reach the top using your stopwatch. Remember to start your stopwatch once the elevator starts to move, not when the doors close, and stop your stopwatch once the elevator stops moving, not once the doors open.

  • Divide the height you calculated by the time it took the elevator to travel the distance, and you'll have a rough estimate of the speed of your elevator.

Tips & Warnings

  • The number you have calculated is only an estimate and should not be treated as a precise figure.

References

  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

  • How to Calculate the Speed of an Object

    Being able to calculate the speed on an object is an important skill. Questions about linear acceleration, motion and how to measure...

  • How to Calculate the Speed of Light

    The speed of light, 299,792,458 meters per second, is constant throughout the universe and was established hundreds of years ago. It can...

  • How to Calculate Deceleration

    Deceleration is acceleration in reverse; whereas acceleration is the rate at which an object speeds up, deceleration is the rate at which...

  • How to Calculate Gross Floor Area

    Gross floor area is the total amount of floor space in a building, usually one used for business. It is important to...

  • Types of Motors for Elevators

    Elevators have become a standard part of most multistory buildings. Although several different types of elevator designs exist, almost all of them...

  • Who Invented the Passenger Elevator?

    The passenger elevator was invented by a company called OTIS using hydraulic technology to navigate through large skyscrapers. Find out how this...

Related Searches

Check It Out

How to Build and Grow a Salad Garden On Your Balcony

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!