How to Replace the Black Ink in an MFC-295CN Brother

Save

Brother MFC-295CN printers were released in 2009 by Brother Industries, Ltd. for home use. The printers use four separate ink cartridges to produce color and black-and-white printouts from your computer, when you receive a fax or when you make copies. The black ink cartridge is used in both black-and-white and color printouts and will run out of ink over time. You must replace the black ink cartridge when it runs out to continue using the printer.

Things You'll Need

  • Replacement black ink part number LC61BK
  • Pull open the ink cartridge door on the front, right side of the printer to access the four printer ink tanks. The ink tanks are installed behind the ink cartridge door in a specific order. The black ink tank is the leftmost ink tank.

  • Press down on the release tab above the black ink tank to unlock the ink tank.

  • Pull the black ink tank out of the Brother MFC-295CN printer and dispose of it properly.

  • Remove the replacement ink tank from the packaging and twist the green knob on the protective cap to the right. Pull the protective cap off of the replacement ink tank.

  • Line the ink tank in the black ink slot by facing the arrow on the top of the tank toward the inside of the printer.

  • Slide the replacement ink tank into the slot until you hear a click and then close the ink cartridge door.

  • Check the printer LCD screen for the message "Did You Change Blck?" If the message appears, press "1" on the control pad to select "Yes." This will reset the printer ink counter. On most occasions the ink counter will reset automatically and you will not see the message.

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

Geek Vs Geek: Robot battles, hoverboard drag race, and more

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!