Things You'll Need
Cobblestone paver molds
Quickcrete
Powdered colorant
Broom
Polymeric sand
Cobblestone pavers are used to create paved areas, such as driveways, walkways, paths, garden edging, and patios. Cobblestone pavers create an elegant look. They can be made from marble or granite or can be created with clay or concrete. The type of material that you use depends on your budget and the look that you are trying to achieve. Pavers are available in a range of colors and textures. Because cobblestones are so strong, they will last for years.
Step 1
Choose the cobblestone paver molds that you wish to use for your project.
Video of the Day
Step 2
Mix the concrete according to directions on the package.
Step 3
Add the powdered colorant to your concrete mixture.
Step 4
Pour a small amount of release agent, such as vegetable oil, into the mold. This prevents the concrete mixture from sticking to the mold.
Step 5
Add the concrete mixture to your mold. Fill it about halfway and tap the mold on the ground several times to remove air bubbles; then continue to fill the mold to the top and tap again several times.
Step 6
Dry the concrete by leaving it in the mold for about 24 hours.
Step 7
Prepare the area on which you intend to lay cobblestones. Make sure it is smooth and free of debris.
Step 8
Lay out the pavers.
Step 9
Sweep polymeric sand into the joints between the pavers and wet the surface with a hose. This process settles the sand. It should be repeated until the cobblestone area has the appearance of being fully grouted with the sand solidly in place.
Video of the Day