How to Use Easy Clean Bottle Sanitizer
If you make your own wine or beer, you know how important it is to have a clean bottle to put it in. Buying a new bottle insures it is clean, but you can also use a bottle that has previously held alcohol in it if it is cleaned properly. Easy Clean Bottle Sanitizer is made exactly for this purpose, letting you thoroughly sanitize used bottles with chemicals that will not change the taste of your home-made wine or beer. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Fill the bucket up with one gallon of warm water. Using cool water or extremely hot water is not recommended with the use of Easy Clean. Open up the Easy Clean container and scoop out one teaspoon of the powder. Dump this powder into the water and stir it vigorously until the powder dissolves into the water.
-
2
Remove the cork or cap from the bottle you want to clean, and rinse it thoroughly with tap water to remove liquid that may be inside. When the bottle is rinsed, dip it into the solution and let it sit for one minute. Fill the bottle 3/4-full with the solution and remove it.
-
-
3
Place the cap or cork back onto the bottle so that it is sealed. Pick up the bottle with both hands and quickly shake it back and forth and side-to-side. Do this for several minutes until all stains are removed and the bottle is clear.
-
4
Open the bottle and dump the solution down the drain. Rinse the bottle again using tap water to remove remaining solution. Place the bottle aside and let it air dry. Repeat the process with all the bottles you wish to clean, then dump out the remaining solution.
-
1
Tips & Warnings
Do not use more than one teaspoon of the solution per gallon of water.
