How to Remove Shiny Iron Marks From Fabric

Hunker may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Depending on the fabric, removing shiny iron marks may be impossible. On natural fibers like cotton, shiny marks may represent a repairable scorch. On polyester fabrics, however, the shiny marks indicate either flattened or melted fabric. Flattened fibers can be lifted, but melted fabric cannot be undone.

Identify Fabric Content

You must know the fabric content to identify possible solutions for the shiny iron marks. A quick check of the label will tell you right away, but if the shine is on an unlabeled piece of fabric or garment, you will have to determine what kind of fabric it is before you try to restore it.

Advertisement

Video of the Day

Video of the Day

Fiber Facts

  • Cotton allows for air circulation, but polyester does not.
  • Cotton fades more quickly than polyester under normal laundering conditions.
  • Polyester is more durable than cotton.
  • Polyester can irritate sensitive skin.

Water Test: Dampen the fabric with water and fold to crease. Cotton will hold a crease, but polyester will not. This test is not always accurate, especially when you're dealing with cotton-polyester blends. A burn test is more accurate.

Advertisement

Burn Test: If a small section of fabric is available to test, burning can answer your fiber question. Burning cotton smells like burning leaves, and the flame and can easily be blown out like a candle. Ashes crumble easily. Burning polyester, however, smells sweet, and the ashes can stick to other substances.

Natural Fibers

You can use one of several ways to remove shiny iron marks from natural fibers:

Advertisement

Water Plunge: When you notice shiny iron marks, plunge the fabric into cold water. Allow it to soak for 24 hours before removing and drying according to the manufacturer's instructions.

Vinegar Cloth: Dampen a clean cloth with vinegar, and dab the vinegar-soaked cloth onto the shiny marks. Follow with a clean cloth dampened with water. Continue alternating the vinegar and water until the mark disappears.

Advertisement

Vinegar Wash: Rewash the item, adding a small amount of vinegar to the wash cycle along with your regular detergent. Use half as much vinegar as detergent.

Steam: Hold the iron above the fabric and release steam onto the shiny marks. Steam alone may remove light marks.

Advertisement

Advertisement

Hydrogen Peroxide: Saturate a clean white cloth with hydrogen peroxide. Lay the cloth on top of the shiny iron marks; then iron over the cloth. Remove the cloth to see if the marks were lifted. If not, repeat until they are gone.

Man-made Fibers

Man-made fabrics, like polyester, pose a special heat risk when ironing. The shiny marks that can develop on polyester may indicate melted fibers, a problem that cannot be corrected. However, if the fibers have just been compressed, a chance exists that you can restore them with white vinegar or hydrogen peroxide.

Vinegar Steam: Saturate a clean white cloth in white vinegar and wring out the excess. Place the wrong side of the fabric face-up on the ironing board. Place the vinegar-soaked cloth on top of the area with the shiny iron marks. Hold the iron above the cloth without touching it to create steam to penetrate the fabric. Turn the fabric right-side up. Rub the shiny marks against the grain to restore the fibers.

Peroxide Wipe: Dampen a light cloth with hydrogen peroxide. Rub the cloth gently on the shiny marks and launder the fabric.

Advertisement

Advertisement

Report an Issue

screenshot of the current page

Screenshot loading...