Keurig B60 Priming Instructions

Save

The Keurig B60 is a single-brewing coffee machine designed to brew a hot beverage in less than one minute. The brewing machine can be used to make coffee, hot chocolate, tea or even an iced beverage in one cup servings, and has a programmable control panel, choice of three cup sizes, large water reservoir and an automatic power system. The machine should be primed prior to the first use, which only takes a few minutes.

Things You'll Need

  • Water
  • Set a large mug on the Keurig B60 drip tray.

  • Lift up the top lid and pull out the water reservoir. Rinse well with water and fill with clean water until just below the top edge.

  • Set the water reservoir back into the base, pushing down until the tabs lock into position. Close the lid.

  • Connect the power cord and press "Power." Wait for the display to show "Not Ready" and then press the "Small Mug" button.

  • Wait approximately four minutes for the water to heat in the unit. When "Ready" shows on the display, press the "Small Mug" button again. The water will dispense in the mug.

  • Empty out the water from the mug. The Keurig is now primed and ready for use.

Related Searches

References

Promoted By Zergnet

Comments

You May Also Like

  • Keurig B60 Care & Cleaning

    The Keurig Special Edition Brewing System model B60 allows you to brew one cup of coffee, or other hot beverage, at a...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!