How to Pour a Footer With Quikrete

Save

Quikrete cement is designed for a do-it-yourself project. It can be used to complete a variety of concrete construction projects, such as pouring footings. Although this process will take a bit longer to complete than pouring with ready mix concrete, it may be required because of limited space, which impedes concrete truck access. You can expect to complete this type of project in four to eight hours, depending on the size and scope of the job.

Things You'll Need

  • Wheelbarrow
  • Mixing hoe
  • Quikrete concrete mix
  • 5-gallon bucket
  • Water
  • Concrete trowel
  • Dust mask
  • Hard rake
  • Mix the Quikrete in a wheelbarrow using a mixing hoe. Add 5 gallons of water to the wheelbarrow before adding the concrete mix. Wear a dust mask to prevent inhalation of the dust. This dust is caustic and will harm the lungs. Add the Quikrete slowly, stopping and mixing small bits as you go. This will help keep lumps out of the Quikrete and make the mixing easier. Make your mixture a little wet rather than dry so that you will have enough time to work with the concrete. Soup is the desired consistency.

  • Pour the concrete mixture into the footer and work it around in the footer with a hard rake. Push the Quikrete across the footer, raking it out level and even. Work the Quikrete up and down with the rake to force the gravel to the bottom of the mixture, bringing the concrete mud to the top. Do not rake the concrete out too thin as this will dry out the mixture quicker. If you will require extra concrete, use a board to hold off the concrete in the footer, preventing it from spreading too thin in the footer bottom.

  • Smooth the Quikrete out with a concrete trowel once the footer has been filled. Rub the mixture vigorously to bring the concrete mud to the top. Wet the concrete lightly with a garden hose to prevent it from drying out prematurely before you can get it down and smoothed. Quikrete has an excess of sand in the mixture, so pay special attention to the sand on the surface of the concrete. If the sand begins to appear in the mixture, mix the concrete around with your trowel to achieve best results.

Related Searches

References

  • "Foundations and Concrete Work"; Fine Homebuilding; 2003
  • "Build and repair with concrete: The Complete Do-It-Yourself Manual"; Quikrete Companies; 1997
  • "Guide to Concrete: Masonry & Stucco Projects"; Phil Schmidt; 2008
Promoted By Zergnet

Comments

You May Also Like

  • How to Remove Quikrete Concrete Sealer

    Removing Quikrete concrete sealer does not have to be a difficult or expensive process. While you can use a grinder or scraper...

  • How to Set Posts in Concrete

    With installations such as porches, decks and fences, the structure itself is only as stable as the posts holding it up. For...

  • How to Mix Quikrete 5000 for Countertops

    Quikrete 5000 is a commercial-grade concrete mix designed for projects such as footers, deck supports, patios and driveway aprons. You can also...

  • How to Use Quikwall by Quikrete

    The Quickrete company manufactures a number of rapid setup compounds that bond to a variety of building materials, including concrete and cement....

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!