How to Get Mold Out of Cushions

Save

Cushions used to make patio furniture more comfortable and aesthetically pleasing are often exposed to moisture and humidity. When not allowed to dry properly, mold spores grow on the cushions and quickly spread to other nearby surfaces. Although you can take measures to avoid mold on cushions, prompt treatment gets rid of any that's already in existence and returns the cushions to a clean, fresh-smelling condition. Left unattended, mold eventually ruins cushion material with its invasive stains and odor.

Things You'll Need

  • Old sheet
  • Natural-bristle brush
  • 3/4 cup all-fabric bleach
  • 2 tsp. dish-washing detergent
  • Bucket
  • Rubber gloves
  • Clean cloths
  • Lay an old sheet in a sunny location. Set the moldy cushions on top of the sheet and leave them there for four to five hours, turning the cushions over halfway through the allotted time so both sides can dry. The sun kills mold spores.

  • Brush off mold spores using a natural-bristle brush. Do this outdoors, away from your patio, to avoid transferring mold to other surfaces.

  • Mix 3/4 cup all-fabric bleach, 2 tsp. dish-washing detergent and 1 gallon warm water in a bucket. Put on rubber gloves to protect your hands from coming in contact with mold. Dip the scrub brush into the bleach solution and then scrub the cushions to remove mold and its accompanying stains.

  • Dampen a clean cloth with water. Repeatedly wipe off the surface of the cushions, rinsing the cloth as needed.

  • Press a clean, dry cloth into the cushions to absorb moisture. Prop up the cushions in a dry location to allow them to air-dry completely. Rotate the cushions to ensure air circulates around them and dries all sides.

References

  • Photo Credit Jupiterimages/Comstock/Getty Images Thomas Northcut/Photodisc/Getty Images Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!