The Motorola HT1250 two-way radio is capable of handling up to 128 separate channels for communication. The radio is usually pre-programmed from the dealer with a set of local channels, but you may not want to use the original options. If you want to set your own options, it only takes a few minutes to program the Motorola HT1250 by removing unwanted channels or adding others.
Deleting Channels
Video of the Day
Step 1
Turn the volume knob at the top of the HT1250 clockwise to power it on. Press the "Menu" button on the front of the radio.
Video of the Day
Step 2
Press the down key, labelled "P2," until you reach the "Program Lists" option in the menu. Press the "Menu " button again to choose the option.
Step 3
Press the "P2" key to scroll to the "Scan List" option and press the "Menu" button. Press the "P2" to scroll to to the "Add Entry" option or "Delete Entry" option and press the "Menu" button.
Step 4
Press the "P2" button to scan to the channel you want to save or remove, then press the "Menu" button. If you are deleting the channel, press the "Menu" button again to confirm your decision.
Step 5
Repeat this process as needed and when you are done programming the radie, press and hold the "Back" button, which looks like a rewinding clock, to exit Menu Mode.