How to Add Shine to Floors Naturally

Save

No matter what flooring you have, be it ceramic, hardwood, concrete or linoleum, keeping it clean and shining is important. All floor surfaces are prone to scratches, dull areas and ingrained dirt, and regular cleaning is required for maintenance of the floors. Several commercial floor cleaners are available that add shine to your floors almost instantly. However, the chemicals contained in them may cause damage to the floor surface, environment and health in the long run. Do not worry, though, as many natural methods are available to keep floors looking fresh and shining.

Things You'll Need

  • White vinegar
  • Terry cloth mop
  • Bucket
  • Baking soda
  • Isopropyl alcohol
  • Olive oil
  • Lemon juice
  • Spray bottle
  • Broom
  • Dish detergent
  • Bleach
  • Scrubbing brush
  • Scouring powder
  • Vacuum
  • Baby oil

Wooden Floors

  • Clean wooden floors by adding 1/2 cup white vinegar in a gallon of water. Soak a mop into it, wring it well and wipe the surface with long and even strokes.

  • Clean scratch marks on wooden floors by mopping it with a mixture of 1/2 cup baking soda added to a gallon of water.

  • Mop the wooden floor with 1/3 cup isopropyl alcohol or rubbing alcohol and 1/2 cup white vinegar added to a gallon of water. Work in small sections and dry each section with a clean rag before moving to the next.

  • Make a mixture of olive oil and lemon juice and apply it to the wooden surface. Allow it to dry before wiping it off. This will give a polished look to the surface.

  • Fill a spray bottle with equal parts vinegar, rubbing alcohol and water. Spray the solution on the floor and dry using a mop or paper towels.

Concrete Floors

  • Remove all loose debris using a broom, and then damp-mop the floor to ensure that all dust particles have been swished out of the area.

  • Add a few drops of dish detergent to a bucket of water and mop the surface using the solution. Wring the mop well and work in small sections by mopping one section and allowing it to dry before moving to the next.

  • Rinse the surface with clean water so that all soap residue is removed.

  • Apply bleach and allow it to sit for 20 minutes before scrubbing it vigorously using a scrubbing brush.

Ceramic Tile Floors

  • Add 1/4 cup vinegar to a gallon of water and mop the floor using the solution.

  • Make a paste of scouring powder and water and apply it on tough stains. Wipe with a damp cloth.

  • Clean grout off ceramic tile floors by sprinkling baking soda on the area. Use a scrubber to start scrubbing. Wipe with a wet cloth.

Linoleum Floors

  • Add shine to a linoleum floor by mopping it with a mixture of vinegar and water.

  • Mop the floor surface with dish washing detergent added to water. Allow it to sit for a while so that any ground-in dirt gets penetrated to come up. Finally, use a broom or vacuum to lift up all the dirt and dust.

  • Pour a few drops of baby oil and allow it to sit for a few minutes before mopping the surface with water. You can substitute baby oil with olive oil or mineral oil.

Tips & Warnings

  • Avoid leaving excess water on wooden flooring for too long as it could find its way into the small openings, causing the wood to enlarge and crack.
  • Ceramic tile floors can easily get scratched and look dull. Moreover, it is important to clean up spills as soon as possible to avoid staining.
  • Avoid usage of bleach or ammonia to remove stains on ceramic tiled floors as the chemicals contained in them can cause damage to the surface. Moreover, do not use steel wool, sandpaper or scratch pads to clean such floors.

References

  • Photo Credit Thomas Northcut/Photodisc/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!