Clear coats of polyurethane on a wood desk create a glossy finish that makes the surface shine like glass. You'll need to prep the wood and apply a sealant before brushing on polyurethane from a can. The finish applies essentially the same way as paint, using long, smooth strokes to create a uniform finish. Polyurethane in a spray can is not recommended for large furniture such as a desk, because it's difficult to control the amount of polyurethane hitting the surface in any one spot. This can result in an uneven finish.
Things You'll Need
- Old newspapers or disposable drop cloth
- Assorted-grit sandpaper
- Lint-free cloth
- Mineral spirits
- Bristle brush, 2 inches wide
- Wood stain, if desired
Move the desk outdoors, if possible, to minimize exposure to chemical fumes. Place the furniture on old newspapers or a disposable plastic drop cloth to catch polyurethane spills and splatters.
Sand all surfaces of the desk until smooth with progressively finer-grit sandpaper.
Brush off wood dust from the desk and wipe down all surfaces with a clean cloth dipped in mineral spirits.
Stain the desk, if desired, using a stain color of your choice. Apply with long, even brush strokes flowing with the wood grain. Let the stain dry 24 hours before applying sealant.
Mix 2 parts polyurethane to 1 part mineral spirits in a small bucket to prepare a homemade sealant. Diluting the polyurethane with mineral spirits helps it absorb better into the wood. This seals the wood in preparation for the final polyurethane coats.
Apply one coat of the sealant in long, even brush strokes, flowing with the wood grain, to all desk surfaces. Long, smooth strokes minimize bubbles in the finish. Let the sealant dry.
Apply polyurethane to the desk with long, even brush strokes flowing in the direction of the wood grain. Leave the desk to dry for 24 hours after applying the first coat of polyurethane. Apply a second coat of polyurethane after the first has dried completely.
Tips & Warnings
- Avoid breathing the fumes of mineral spirits and polyurethane.
- Do not smoke or work near an open flame while using furniture chemicals.
- Do not shake polyurethane in the can, as this forms air bubbles that will mar the finish on your desk.
- Photo Credit Working desk image by Rachabodin from Fotolia.com
How to Polyurethane a Table
Adding a clear coat of polyurethane brings out the natural beauty of a wood table. Polyurethane topcoats applied over painted or stained...
How to Restore an Oak Roll Top Desk
Oak roll-top desks are practical pieces of furniture for a home or office that add a touch of elegance to their surroundings....
How Long for Polyurethane to Dry on Wood Floors?
Since polyurethane coatings were [first introduced](http://polyurethane.americanchemistry.com/Introduction-to-Polyurethanes/History) in the 1950s, polyurethane has become the No. 1 choice for floor finishers because of its...
Should You Put a Poly Finish on Painted Furniture?
A good paint job can transform a tired, worn-out piece of furniture into something fantastic. This even works on furniture that you've...
Can You Put Stain & Polyurethane Over Stained Wood?
When you decide that today is the day to change the appearance of stained furniture or of a stained hardwood floor, you...