How Do I Repair a Crack in the Floor of a Shower Surround?

A shower surround is usually made of plastic or fiberglass.

A plastic or fiberglass shower surround can crack due to uneven weight distribution. However, instead of removing and replacing the entire surround, you can patch it with a fiberglass repair kit available form most home improvement centers. A repair kit is less money than a bathroom remodel and it will only take a few hours to install. You will be able to make use of your shower much faster with the repair kit.

Things You'll Need

• Fiberglass repair kit
• Fiberglass roller
• Rag
• Orbital sander

Instructions

1. Mix the catalyst into the fiberglass resin and mix it up with the mixing stick supplied with the kit. Place the fiberglass sheet into the resin and soak it.

2. Place the fiberglass sheet over the crack in the shower surround and flatten it out by running a fiberglass roller over the surface. This will squeeze out extra fiberglass resin. Wipe up the resin with a wet rag. Allow time for the fiberglass to dry. Follow the drying times listed on the kit's packaging, as the times will vary depending on the kit you purchase. Generally, 24 hours is adequate.

3. Sand the surface of the fiberglass with an orbital sander. Use the edge of the sander to" feather" the edges of the fiberglass patch flat with the surround. Feathering is the act of blending the edges in place. When finished, the patch should be smooth and blend in with the surround.

References

• The Funtime Guide: How to Make a Fiberglass Repair on Your Shower or Bathtub; Amy;
• Surface Repair: DIY Tub and Shower Paste Repair Kit