Intermatic Switch Timer Instructions

Push the dial on a Intermatic switch timer to manually turn lights on and off.

The Intermatic switch timer is installed in the wall in place of a standard light switch. The timer operates the light through either manual operation or a set, automatic operation. The timer is programmed in one of two ways: the 24-hour method or the Rapid method. The 24-hour method records your actions with light over a 24-hour period and repeats these steps daily. The Rapid method allows you to set your own on and off times.

Instructions

1. Slide the "Control" lever to "Off-Clear" and hold for 20 seconds to begin manually programming the timer using the Rapid method. The indicator light at the top of the unit flashes, indicating all previous settings are cleared. Slide the "Control" lever to "On." The indicator starts flashing. Twist the "Time" dial clockwise one click to the half-hour closest to the current time, and then push the dial to set the time. Twist the dial to the desired "On" time, and then push the dial to save the setting. The light connected to the timer turns on. Twist the dial clockwise to the "Off" time and push the dial to save the setting. Twist the dial until the indicator illuminates steadily, indicating the timer is activated.

2. Slide the "Control" lever over to "Off-Clear" and hold for 20 seconds to begin automatically programming the timer using the 24-hour method. The indicator flashes on then off. Slide the "Control" lever to "On." The indicator flashes. Push the dial to turn the light on and off throughout your day. The timer records your habits in a 24-hour period. Following the 24-hour period, the indicator remains on, indicating the timer is automatically programmed and will repeat the pattern.

3. Twist the dial clockwise and stop at the nearest, current half-hour while the switch timer is in "Automatic" mode to review the programmed settings. Push the dial to activate the review function. The indicator turns off. Slowly twist the dial clockwise while watching the dial time. The light will turn on and off at the programmed times. Push the dial to end the review function.

4. Push the dial twice to toggle between the two operation modes, "Automatic" and "Manual." In "Automatic" mode, the timer turns the light on and off in conjunction with the programmed settings. The indicator remains on during "Automatic" mode. In "Manual" mode, the programmed settings are disabled and the light goes on and off at each press of the dial. The indicator remains off during "Manual" mode.

References

• General Pool & Spa Supply: Intermatic Wall Switch Timer EJ351 Owner's Manual