A septic tank's concrete lid needs to be removed to empty out sludge every few years before the sludge backs up into your house or overflows in the yard. For safety reasons, the lid is purposely heavy and awkward to remove. Not only does the lid protect the tank from erosion and damage, it also keeps children and others from easily accessing the sewage and suffering harm. To save time and money, locate the tank, dig up the earth around it and expose the heavy lid before the septic tank service person arrives, suggests the Seattle-King County Public Health Department.
Things You'll Need
- Pick-style pry bar
- Caution tape
Locate the septic tank lid and use the shovel to dig down on an angle so the sides of the hole won't crumble into the open tank. On average, the top of a septic tank is a foot below the surface, but this depth could vary greatly. If your home was built before 1975, there may be a two-compartment tank to uncover.
Dig a generous amount of space around the tank--approximately an extra 18 inches--for easier lifting and handling of the lid.
Pile the dirt on the far side of the hole, opposite the side accessed by the pumper truck.
Pry the seams of the lid open with the pry bar. The lid may be in more than one piece.
Employ an assistant to help you hoist the lid to the surface. Lay it out of the way of the pumper truck and septic worker.
Stake the immediate area and ribbon it off with caution tape for safety purposes, if the hole will sit unsupervised for any length of time.
Tips & Warnings
- Most jurisdictions require permits for septic tank draining and that a licensed tank cleaner perform the job. Allow 10 days for the permit’s approval before servicing can begin.
- If your septic tank does not have a riser for ease of annual septic-level checking and cleaning, speak with your septic expert about installing one while the hole is open. Some newer septic systems have plastic lids, which are simply lifted off after removing some screws.
- Photo Credit Jeff Randall/Lifesize/Getty Images
How to Replace a Concrete Septic Lid
Your septic system uses a concrete lid to prevent odors and sewage from seeping into the ground. The lid requires removal every...
How to Convert a Concrete Septic Lid to a Plastic
Most concrete septic tanks are installed with heavy concrete lids over the manholes and access holes and then covered with soil. While...
How to Replace the Bladder in a Water Pressure Tank
A pressure tank with an internal bladder is an effective way to provide water within a plumbing system. When a faucet is...
How to Open a Septic Tank Lid
Your septic system is for the most part maintenance free. Other than pumping out the solid waste every three to five years,...
How to Locate the Cap to a Septic Tank
A septic tank cap, also called a lid or access hatch, is normally located on the top of the tank near the...
How to Remove a Septic Tank
Your septic tank has failed, or new construction plans call for it to be relocated. Whatever the reason, the tank must be...
How to Make a Septic Tank Cover
Septic tank covers, which sit atop a tank to protect it from excess moisture -- and you from unpleasant odors -- have...
How to Make a Handle for a Septic Tank Lid
Some of the larger septic tank lids have handles to assist in removing and installing the lid. If your septic tank lid...
How to Add a Riser to a Septic Tank
Learn the facts about septic tank risers, why they're important, how to install them and costs to install them.