The kick plate on a Frigidaire dishwasher is the rectangular panel below the door. It covers access to some of the components inside your dishwasher, including the drain hose and water pump. Installing the kick plate takes only a few minutes; you use a Phillips-head screwdriver.
Things You'll Need
- Phillips-head screwdriver
Insert the bottom edge of the kick plate into the groove at the bottom of the dishwasher.
Tilt the top of the kick plate to the upright position so the plate is now vertical to the floor. Push inward.
Install a Phillips-head screw in the hole on the front left and right sides of the kick plate, using a screwdriver. The kick plate is now secure.
How Does a Fan Work on a Toe Kick Heater?
Toe heaters are ideal for warming up cold spaces and floors, such as bathrooms and kitchens. Toe kick heaters are available as...
How to Kick a Door Down
Kicking down a door is not something you do on a day to day basis. There may come the time, however, when...
How to Install Kick Plates
Sometimes doors don't open smoothly---either a person is carrying too much or the door sticks. In this case, the natural reaction is...
How to Install a Dishwasher Access Panel
Dishwasher access panels protect the underside of the appliance where electrical and water connections are found. Installing these panels is easy to...
How to Polish Kick Plates
Kick plates protect the bottom of doors or stair steps from damage. Metal kick plates may be bronze, brass, stainless steel, aluminum,...
How to Install the Bottom Plate on a Frigidaire Dishwasher
Frigidaire dishwashers are built with removable bottom plates under the doors of the appliances. The removable panel makes it possible to make...
How to Service a Water Pump on a Frigidaire Dishwasher
In addition to saving you the trouble of washing dishes by hand, using a Frigidaire dishwasher is beneficial in that it sterilizes...