Instructions for a Toro TMC-212 Sprinkler Timer

Save

The Toro TMC-212 irrigation timer keeps your sprinkler system on a consistent watering schedule. The timer is connected to valves and sprinklers and, when activated, the sprinklers rise up and water your lawn and garden. The control panel features a dial, a program switch, navigation buttons and a liquid crystal display. After the TMC-212 is installed, you might have questions about how to program it.

  • Twist the dial on the left side of the panel to "Watering Days" to set the watering day schedule. Move the "Programs" switch in the center of the panel to the program letter you wish to schedule. The currently set watering schedule appears on the display. Push the "Next" button on the right side of the panel to display the days currently set. "Su (Sunday)" flashes. Press the "On" button to designate Sunday as a watering day or press "Off" to take Sunday off of the schedule. After "On" or "Off" is pressed, the next day, Monday, will flash. Repeat the process until all days are programmed and twist the dial to "Run."

  • Twist the TMC-212 dial to Watering Days and switch to the program for which you would like to set intervals. The currently scheduled days are displayed. Press Next. The current interval flashes. Push the On or Off button to change the interval number (1-7). Push Next. Push the On or Off button to change the interval start day. Repeat the process for each program.

  • Twist the dial to Watering Days to set an even or odd day schedule. Select the desired program. The currently set watering schedule appears. Push the On or Off button until "Odd" or "Even" appears as you wish. When "Even" is selected watering occurs on even days of the month. When "Odd" is selected, watering occurs on odd days of the month, excluding the 31st and February 29.

  • Twist the TMC-212 dial to "Watering Days" to turn off a program. Select the program you wish to turn off. Push the On or Off button until "Off" flashes. Repeat the process for each program as desired.

  • Twist the dial to "Start Times" to begin scheduling start times for each program. Select the program you wish to schedule. Start time "1" flashes. Push the On or Off button to increase or decrease the displayed start time. Push the Next button to schedule up to three more start times for each day.

  • Twist the dial to "Station Times" to set station run times. Select the TMC-212 program you wish to schedule. Station 1 flashes and its current run time or "Off" is displayed. Push the On or Off button to increase or decrease the run time. Push Next to proceed to the next station. When all station run times are set, twist the dial to "Run."

Related Searches

References

  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

How to Make a Vertical Clay Pot Garden

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!