Wooden doors on the exterior of your home create a welcoming and stylish entryway, but they come with a number of difficulties. One of the most prominent is warping --- as the moisture and temperature change around the door, which they inevitably will, with the door exposed to the outdoors, the wood gains or loses moisture and will gradually shrink, expand, twist or otherwise change to create a warped and unusable appearance. However, certain precautions can prevent this warping from occurring.
Things You'll Need
- Flat support system
- Wood sealant
- Paintbrush or roller
Store the door in the installation area for a minimum of 48 hours prior to hanging the door on the hinges. This will allow the wood to expand and contract naturally without being held down by the hinges, settling it in a final moisture content for the area. Changes in the future due to temperature and humidity will be less severe, often as small as ½ inch.
Set the door on a flat work space or a flat support system. The door must be completely flat during sealing, or the moisture from the sealant can cause it to warp in the direction it is leaning.
Seal all edges of the door with a manufacturer-provided or recommended wood sealer. The sealer, whether colored or clear, will guard the door from absorbing moisture. Make sure you seal all six edges: front, back, top, bottom and both sides. Even if they are not visible, wood surfaces will absorb moisture.
Apply two coats of sealant to each of the six surfaces for longer-lasting protection. You can apply the coats with a paintbrushes or roller, as long as you make sure each area of the wood is thoroughly covered. Allow the sealer to dry overnight --- unless otherwise directed by the product instructions --- before installing the door.
Tips & Warnings
- The severity of the warping, and whether warping will occur at all, also depends on the type of wood, and how old it is. Both of these factors determine the amount of moisture in the wood to begin with.
- There is no sure-fire way to prevent a wooden door from warping; even with these precautions, it may still occur. If you cannot seem to prevent warping, consider using a different material for your door.
- Stain and paint are not sealers; they will change the appearance of the door but do not provide moisture protection. You must use sealer, even if you paint or stain, as the last two coats to ensure that the door repels moisture.
- Photo Credit Jupiterimages/Photos.com/Getty Images
How to Paint an Exterior Door
Paint your exterior door in place or on sawhorses. Prepare by washing, sanding and masking, then apply primer, if needed, and two...
How to Seal a Brick House to Prevent Mold, Mildew, and Moisture
When bricks are not properly sealed, moisture can be a major problem. When moisture attacks your brick home, the result can be...
How to Repair Warped Steel Storm Doors
Most steel storm doors warp because the top or bottom has been kicked or wedged repeatedly to hold them open and this...
How to Measure Replacement Exterior Doors
Ordering a replacement for your exterior door requires accurate measurements. The measurements are not complex, but if you get one measurement wrong,...
How to Keep Wasps & Hornets Away From Screen Doors
Wasps and hornets can be troubling creatures, especially when they won't leave you alone. Screened-in porches are optimal environments for these pests...
How to Prevent the Warping of CCA Treated Wood
Treated lumber, which is notorious for warping and bowing, is treated by dunking the lumber into a vat of liquid and then...
How to Prevent Warping & Splitting of Fence Boards
Fence boards are consistently exposed to tough weather conditions and are often constructed improperly, promoting splitting and warping. Splitting occurs with improper...
How to Build & Install an Exterior Door Frame
Exterior door frames are important in keeping your home secure. No matter how strong the lock, the door is only as difficult...
How to Build a Flat Panel Wood Kitchen Cabinet Doors
Building your own custom cabinets can be a cost-saving and rewarding enterprise. Using the right tools, you can produce a stunning set...
How to Fix a Warped Cedar Wood Lid
The most common cause of warping with manufactured doors or lids is a variation in the moisture of the wood. Often one...
How to Prevent Exterior Door Air Leaks
Keeping a house cool or warm, depending on the season, is a struggle for some. The high cost of electricity and gas...
How to Seal a Warped Door
A warped door is the result of moisture penetrating the wood during rapid changes in temperature and humidity. Winter is a particularly...