dice

Click to play our newest game, yahtzee!

dice

How to Test the Hertz in a Generator

The output frequency of a generator is measured in Hertz, which refers to the number of alternating current (AC) cycles per second. The standard frequency for electrical service in the United States is 60 Hertz. The RPM of the engine that powers the generator is the factor that determines the frequency, and the generator owner's manual contains instructions on how to adjust the engine speed. Before you can adjust the frequency, you need a way to test it. High-end multimeters include this function, but a cheaper and easier way to measure frequency is to use a Kill-A-Watt-type household load meter.

Plug the Kill-A-Watt meter into a standard 110 volt outlet either directly on the generator, or connected to it.

Start the generator and allow it to reach full operating temperature. Plug a small heater or an incandescent lamp into the generator to provide a load.

Press the "Hz" button on the Kill-A-Watt meter. Read the frequency directly on the LCD screen.

Things You'll Need:

  • Kill-A-Watt meter
  • Small heater or incandescent lamp

Tip

If your generator has both 110 volt and 220 volt output, use a 220 volt load or two 110 volt loads, one on each leg of the output. Refer to the manual.

Provide at least a 10 pct load, but do not overload the generator. Again, consult the manual.

Our Passtimes