How to Troubleshoot a Craftsman Table Saw


Craftsman table saws can be used to perform rip cuts, crosscuts, grooves, freehand cuts, simultaneous bevel and miter cuts -- called compound cuts -- and more. The blade can be raised using a blade elevation hand-wheel and then it can be tilted to the required angle. Problems with the saws can include not starting, inaccurate cuts, binding and other issues. Before you take your table saw in for repair, try troubleshooting the problems yourself.

Things You'll Need

  • Square
  • Plug the saw in to the power supply if it won't start. If the saw starts, but won't come up to speed, check that the extension cord isn't too long. Replace the cord with a shorter one and try the saw again.

  • Blow sawdust and dirt out of the elevation and tilting mechanisms if the blade won't rise or tilt easily. Debris can block easy movement.

  • Verify that the saw is mounted properly to the legs, or the work surface, if it vibrates excessively. Tighten all of the mounting hardware and try the cut again.

  • Adjust the positive stop by checking the blade with a square and then adjusting the positive stop if the 45 degree and 90 degree rip cuts are off. Adjust the miter gauge if the 45 degree and 90 degree crosscuts are out of whack.

  • Tighten the Craftsman's miter angle knob if the material gets kicked back from the blade, and align the splitter on the blade guard if the lumber binds.

Related Searches


  • Photo Credit Jupiterimages/Comstock/Getty Images
Promoted By Zergnet


You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!