How to Use the Conqueror Squeegee
Window tint is applied commonly on automobiles. However, it is possible to apply window tint to your home windows to add additional privacy and provide shade from the sun. This helps reduce the temperatures inside the home during the summer and also eliminates glare on your TV. The Conqueror squeegee is used to apply the tint to your windows. It is relatively long and has a sharp tip to help you get the tint into the window corners. Does this Spark an idea?
Things You'll Need
- Rags
- Lint free towels
- Window film
- Tape measure
- Utility knife
- Spray bottle
- Soapy water
Instructions
-
-
1
Clean the inside of your windows with soapy water and a clean rag. Once cleaned, dry the windows with a lint-free towel.
-
2
Measure the window glass with a tape measure. Transfer the measurement to the window film and then cut the window film to the correct size using a utility knife.
-
-
3
Place a towel onto the windowsill. As you install the tint, the sill will get wet. The towel will protect your windowsill.
-
4
Wet the window with the spray bottle of soapy water.
-
5
Place the film onto the window, sliding it across the wet glass as necessary to adjust its position.
-
6
Place the Conqueror squeegee in the center of the film and hold it at a 45-degree angle to the window glass.
-
7
Slide the Conqueror squeegee outward from the center in all directions to force air and water out from under the film.
-
8
Press the tip of the squeegee against the corner of the film to force the corners against the glass. This is important as the corners will start to peel if they are not properly seated on the glass surface.
-
1
References
Resources
- Photo Credit Goodshoot/Goodshoot/Getty Images
