How to Convert Simplicity Bassinets to Co-Sleepers
The Simplicity 4-in-1 bassinet serves as a changing table, cradle, bassinet and co-sleeper. If you want to co-sleep with your infant, but still want the baby accustomed to his own bed, the Simplicity co-sleeper bassinet provides a separate sleep area for your baby. The separate bed helps keep your baby safe, reducing the risks encountered by sharing a bed with a small infant.
Other People Are Reading
Instructions
-
-
1
Flip the locking tabs down on each wheel of the bassinet. Lock the bassinet so it does not rock. Push in the tabs on each side of the canopy and lift the canopy off the bassinet.
-
2
Unfasten the fabric on the co-sleeper side of the bassinet to expose the top rail. The co-sleeper is opposite the side where the mobile mounts to the bed. The fabric is attached with hook and loop fasteners. Pull the corner of the fabric layer to separate it. Pull the top rail out of the mounting area by grabbing the open end of the tube and sliding it toward you.
-
-
3
Roll the fabric under the lower rail on the co-sleeper side of the bassinet. Unsnap the fabric snaps securing the basket.
-
4
Push the adjustment tabs on the frame below the bassinet basket and lower the frame to the mounting point closest to the bed's mattress level. Release the tabs and fasten the fabric snaps to secure the bassinet basket at the new level.
-
1
