How Can I Bend 1/4" Plywood?


Plywood is a wood composite material made of thin layers of wood veneer glued together into a panel of consistent thickness. It is usually sold in 4-foot-by-8 foot sheets. Plywood made from soft birch is designed specifically for bending and is known variously as bending birch or bending plywood. It is ideal for large projects that require a lot of bending, but may be cost-prohibitive. Standard ¼-inch plywood can be bent to fit curved walls or furniture projects, if it is first soaked in warm water to make the layers pliable.

Things You'll Need

  • 1/4-inch plywood
  • Table saw
  • Tape measure
  • Hot wet towels
  • Nails or staples
  • Primer
  • Paint brush
  • Sander
  • Measure and cut your plywood to fit the portion of your project that requires bending. Use a table saw to cut the pieces.

  • Soak your towels in hot water, the hotter the better. Lay the hot, wet towels on top of the cut plywood, covering the entire surface. Allow the moisture to soak into the plywood, replacing the towels every couple of hours--as they cool--with more hot, soaked towels. Continue soaking the plywood with the towels until it it completely saturated and soft. (This may take 24 hours or more.)

  • Check the plywood for pliability. Once it flexes with minimal force, it is ready to install. Work quickly once you remove the hot towels, because the wood will lose flexibility as it cools. Attach the end of the plywood piece with staples or nails, starting from the end that has the most curve and working toward the lesser curve. If it is to be a freestanding shape, lock the soft plywood into place using clamps, so it will dry in its curved form.

  • Fasten the plywood along both edges, pressing it into place as you go. Apply hot towels, if needed, to keep the plywood flexible as you work. Allow the plywood to dry slowly for best results, do not apply fans or heat the surface.

  • Sand the dry plywood gently as it will have raised grain that can be easily damaged. If the project will be painted, apply a coat of primer with a brush and allow it to dry before sanding to present a sturdier surface for sanding.

Related Searches


  • Simply Fabulous Plywood Projects; Jeanne Stauffer; 2006
  • Bent Plywood: The Art of Plywood Furniture; Dung Ngo; 2003
  • Photo Credit Jupiterimages/ Images
Promoted By Zergnet


You May Also Like

  • How to Soak & Bend Plywood

    Learn how to bend plywood. Information on bendable types of plywood, tools needed and drying times included.

  • Plywood Bending Techniques

    You can use plywood that has been bent to a radius to cover many surfaces that it would not normally fit. Learning...

  • How to Treat Plywood for Outdoors

    Plywood is tough but it still needs to be sealed, especially on the edges, to prevent moisture penetration when used outdoors. To...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!