Instructions on How to Operate a Sunbelt Swim Spa
The Sunbelt Swim Spa is a hot tub that's big enough for you to swim in, hence its name "Swim Spa." It comes with numerous features, many more than the average spa. Therefore, learning how to operate your Sunbelt Swim Spa can be confusing at first, especially if you have lost or misplaced your user manual.
Other People Are Reading
Instructions
-
-
1
Open the power panel and turn on the power to the Sunbelt Swim Spa. Push all the buttons to power all the jets once the panel screen displays "Pr."
-
2
Set the time for your Sunbelt Swim Spa by pressing the "Time" icon and then the "Star" icon. Push the "Up" or "Down" arrows to set the hour. Push "Star" to enter minutes. Push the "Up" or "Down" arrows to set the minutes. Push "Star" and then "Time" to exit time setup.
-
-
3
Push either the "Warm" or "Cool" button to display the temperature. Then adjust the temperature by pushing either the "Warm" or "Cool" button. Each time one of the buttons is pushed, the temperature will adjust one degree accordingly.
-
4
Set the mode for the spa by pushing the "Mode/Prog" button and then pushing the "Cool" button to toggle to the mode that you want. Push the "Mode/Prog" button again to set the desired mode.
-
5
Put the spa in standby mode by pushing either the "Warm" or "Cool" button and then "Jets 2."
-
6
Push the "Jets 1" button to turn pump one on and off and to switch the pump between high and low speeds.
-
7
Push the "Jets 2" button to turn pump two on and off and to switch the pump between high and low speeds.
-
8
Push the "Blower" button to switch the blower between medium speed, high speed and off.
-
9
Invert the display of the screen by pressing either the "Warm" or "Cool" button and then the "Blower" button.
-
10
Push the "Light" button to turn the spa light on and off.
-
1
Tips & Warnings
You can lock the display screen so that it cannot be accidentally changed by someone by pushing "Warm" or "Cool," then "Time," then "Jets 1" and then three seconds later press "Warm." Unlock it by pushing "Warm" or "Cool," then "Time," then "Jets 1" and then "Cool."
Your Sunbelt Swim Spa's temperature should not exceed 104 degrees Fahrenheit to reduce the risk of injury.
